We are proud to announce that our company is an ISO 17025 SAC-SINGLAS Accredited Laboratory in the field of Calibration and Measurement and Vibration and Shock Testing.
Calibration and Measurement Scope
When absolute acceleration values are essential, let ETS Solutions test and calibrate your equipment.
Vibration sensor calibration
Vibration controller calibration
Vibration meter
Environmental chamber calibration
There is no substitute for practical experience when it comes to product design and qualification testing.
Vibration and Shock Testing Scope
Our ISO 17025 SAC-SINGLAS Accredited Laboratory provide comprehensive vibration and shock testing solutions for:
IEC 60068
ASTM D4728
IEC 61373
MIL-STD 810
MIL-STD 883
MIL-STD 202
MIL-STD 167
MIL-PRF 28800
By having below full suite of testing capabilities, we are able to perform customized testing procedure that meet your specific testing requirement.
Sine Vibration
Random Vibration
Classical Shock
Sine on Sine Vibration
Sine on Random Vibration
Random on Random Vibration
Sine on Random on Random Vibration
Shock Response Spectrum (SRS)
Transient Time History
During protoype testing, below advance features may be needed for understanding the dynamic characteristic of the product, improving the product reliability, and for counter measuring the failure observed during testing.
Resonance Search, Track and Dwell, to be able to observe the product behaviour under the worst vibration environment.
Frequency Response Function (Transmissibility and Q Factor), to be able to understand the dynamic characteristic of the product.
Transient Capture, to be able to understand the product behaviour during the transient shock event.
Field Data Replication, to be able to replicate exactly the same time domain vibration environment.
Kurtosis Control, to be able to adjust the fatigue damage experienced by the product and maintain the PSD curve at the same time.
Accelerated Testing, to be able to shorten the testing period and maintain the similar fatigue damage at the same time.
