GT Series

Economical solutions to provide optimum test platform with any shaker combination for general purpose horizontal vibration testing

GT Series Slip Table

GT Series, guided oil film tables are designed with less expensive guided V-Groove bearings, combined with magnesium slip plate. Oil is supplied through the natural granite slab port holes and is dispersed throughout the underside of the slip plate. The oil film provides a low friction slip surface and a damping medium for restraint of pitch, roll and yaw moments.


  • Light weight magnesium slip plate
  • Precision coupling
  • Excellent force transmission
  • Low pressure hydraulic pump
  • Self-contained oil Reservoir with oil filter
  • ¬†Yaw restraint by V-Groove guide bearings combining with the armature guidance system
  • General purpose horizontal vibration test
  • Automotive component test
  • Vehicle exhaust test
  • Heavy duty connector test
  • Consumer electronic appliance or component parts testing
  • Mil-STD testing for mechanical component
  • Natural granite table slab for life long operation
  • Less expensive technique to perform horizontal testing
  • Low profile reaction mass with total system isolation (Less than 5 Hz)
  • Stiffened and welded steel body design with high mass to force ratios
  • Geared Aided Rotation (ETS system only)
    Rotation of the shaker body to work with the slip table is achieved by either ratchet crank rotation or chain wheel gear reducer. Rotating of the shaker is perform with ease by the rotation aid. Mechanical stop is installed to align the shaker with slip table precisely.
  • Safety Protection
    The stainless steel guard is installed in front of slip plate. The safety protection prevents any operators from putting their fingers into the oil trough. It will prevent any falling foreign particles or contaminants from falling into the oil trough during the test.
  • Unibase Slip Table
    The unibase design is the optimized solution for horizontal vibration testing. The common base reinforced assembly allows easy and consistent alignment between shaker and the slip table. The low profile concept conveniently fit for environmental testing with chamber.
1.2m x 1.2m GT Series unbase slip table
  • Standalone slip table
    The standalone design, an independent steel platform supported by the levelling feet. The customised design allows the feasibility of any vertical shaker from ETS or other manufacturers (existing or new) to couple with the standalone slip table assembly.
1.5m x 1.5m Stand Alone BT Series Slip Table
  • Designed for combined environment applications available
    Integration with climatic chamber can be customised to match different table sizes.
Slip table combined with enviromental test chamber
  • Electrical Rotation Unit
    Rotation of the shaker body to work with the slip table can be carried out with no effort with the Electrical Rotation Unit option. Rotating of the shaker is controlled by a push button control. Mechanical stop is installed to align the shaker with slip table precisely.
Electrical Rotation Unit
  • Thermal Barriers
    Glass fibre thermal insulating sheet is available when the slip table is to be integrated with the chamber for combined vibration-temperature testing. The thermal barrier isolate the slip plate
Thermal Barrier
  • Air Isolation Feet
    Optional air isolation feets prevent the vibration from the shaker during operation from transmitting to the floor and building. The need for a seismic base can be eliminated.
Air Isolation Feet
  • Air Caster
    The air caster is the load module system, which utilizes the air film to float the shaker system. The load movement is easy, exceptionally smooth and Omni-directional.
Air Caster
  • Levelling Feet
    The levelling feet is combined with the outrigger support and adjustable foot. The levelling feet could provide efficient precision mounting and swift screw adjustment. This allows consistent and solid support for the heavy assembly.
Levelling Feet