Actuators & Accessories

Comprehensive range of parts & accessories for your every needs

Actuator with preload on base for heavy static load


AH Series Actuators AH Series Actuators AG Series Actuators AG Series Actuators AS  Series Actuators AS Series Actuators 150kN Force - 9m.s Velocity Mutiple Linear Impact Actuator 150kN Force – 9m.s Velocity Mutiple Linear Impact Actuator AH Series Actuator - 2000kN, 250mm Stroke
AH Series Actuator – 2000kN, 250mm Stroke Long Stroke Actuators (Over 2 meters Stroke) Long Stroke Actuators (Over 2 meters Stroke)

Hydraulic linear actuators are a basic component in servo-hydraulic systems. They differ for rated force, useful displacement and dynamic performance. Servo2K can deliver three different series of linear actuators:
AH series which are hydrostatic bearings (3kN to 2,500kN)
AG series plain bearings (3kN to 2,500kN)
AS series hydrostatic bearing actuators that directly replace Schenck PL type actuators (10kN to 1,000kN)

Hydrostatic bearings actuators tolerate high side-loads and reduce friction and heat dissipation during high frequency operation.

AT Series Rotary Actuators_2

Hydraulic rotary actuators allow the application of torques on the specimen. The actuators delivered by SERVO200 are vane type and feature +/- 50 degrees useful angle.

The rated torque ranges from 0.5 KNm to 32 kNm standard AT series.

Larger sizes are available for specific applications.

AT Series Rotary Actuators AT Series Rotary Actuators
Rotary Actuator 64 kNm Rotary Actuator 64 kNm
Belt Driven ROTATING TORSION ACTUATOR  12 kNm @ 6.000 rpm Belt Driven Rotating Torsion Actuator 12 kNm @ 6.000 rpm
JB Series Ball Joint JB Series Ball Joint
JC Series Cardan Joint JC Series Cardan Joint
SC Series Servovalve Connecting Plate SC Series Servovalve Connecting Plate
Hydrostatic Bearing Ball Joint ( 160 kN axial) Hydrostatic Bearing Ball Joint ( 160 kN axial)
Hydrostatic Bearing Cardan Joint  8 kNm, Torque  40 kN Hydrostatic Bearing Cardan Joint 8 kNm, Torque 40 kN

Hydraulic Power Supplies provides the hydraulic power to actuators in order to develop displacements and forces.

The standard hydraulic power supplies series HU provides oil flow at 28 MPa from 25 l/min (15 kW) to 250 l/min (132 kW).

Cascaded Hydraulic Power Supplies Unit (1) Cascaded Hydraulic Power Supplies Unit
Hydraulic Power Supply with Acoustic Hood Hydraulic Power Supply with Acoustic Hood

The standard MB series Service Manifolds can apply low pressure and low flow to actuators during test set-up and high pressure full flow during test execution.

The rated flow ranges from 65 l/min to 500 l/min for single unit.

MB Series Hydraulic Service Manifolds (Sandwich  Mounted) MB Series Hydraulic Service Manifolds (Sandwich Mounted)
MB Series Stand Alone Hydraulic Service Manifold MB Series Stand Alone Hydraulic Service Manifold
Hydraulic and Electrical Manifolds Hydraulic and Electrical Manifolds

*Specifications are correct at the time of publication. In keeping with our commitment to continuous product improvement, the information herewith is subject to change. ETS reserves the rights to amend specifications without prior notice.