1-Channel Telemetry For Rotating Shafts

Completely non-contactless simple, accurate method of measuring strain, torque, thermocouple or voltage signals on rotating or moving machinery 

KMT single-channel telemetry systems provide a simple, accurate method of measuring strain, torque, thermocouple or voltage signals on rotating or moving machinery while operating in a completely contactless mode. Continuous power is supplied inductively and the signal is transmitted from the moving to the stationary component – with no brushes or wires required! The wireless transfer guarantees an absolute wear-free continuous operation and accurate transmission of measured data.

Applications can be found in the research, development and production of motor vehicles, turbines, wind turbines, aircrafts, rail vehicles, as well as any other machinery and in test bench operations.

Easy configuration, assembly and installation, and the flexibility of using inductive or battery power for the rotor electronics, make the single-channel telemetry systems TEL1-PCM and MT1-PCM genuine multi-talents for all rotary applications.


TEL1-PCM-IND

Digital 1-channel telemetry system for strain gage applications on rotating shafts, gain and AZ controlled on receiver side, signal bandwidth up to 1200 Hz (-3 dB), transmission distance between coil and receiving head up to 25 mm (option: 35 mm), inductive powering… Contact us for more info


TEL1-PCM-FLEX-IND

TEL1-PCM-FLEX-IND – The extremely flat & flexible transmitter enables torque measurement even in confined spaces … Contact us for more info


TEL1-PCM BATT

Digital 1-channel telemetry system (battery-powered) for strain gage applications on rotating shafts, gain and AZ controlled on receiver side, signal bandwidth up to 1200 Hz, distance to receiving head up to 150 mm, powering by battery 6-9 V … Contact us for more info


TEL1-PCM-HS BATT

Digital 1-channel “HIGH SPEED” (50 kHz) telemetry system for strain gage and ICP applications on rotating shafts, gain and AZ controlled on receiver side, signal bandwidth up to 50000 Hz, distance to receiving head up to 20 mm, powering via battery or inductive … Contact us for more info


MT1-PCM

Digital 1-channel radio telemetry system for strain gage applications on rotating shafts, gain and AZ controlled on receiver side, signal bandwidth up to 500 Hz, transmission distance to receiving antenna 1-10 meter, battery powering of encoder/transmitter: 6-9 V… Contact us for more info